Skip to content
Trade Hiring Guide

Hire Roof Tilers from South Africa

Roofing crews are the first trade to lose a week when the weather turns, so one missing tiler can hold a whole frame stage. RecruitUp Global sources South African roof tilers with real concrete-tile, bedding and pointing experience for Australian roofing contractors, via the 482 visa.

Published: 9 November 2026Updated: 9 October 2026Written by: Genine Raats
333311
ANZSCO code (Roof Tiler)
54.5%
National trade fill rate (JSA, Dec 2025)
4–8 mo
Sponsorship timeline
$79,423
Minimum salary (CSIT), 2026–27

A note on visa guidance: RecruitUp Global is a recruitment agency, not a migration agent. All content on this site is for general educational purposes only. For immigration advice or to lodge a visa application, consult a MARA-registered migration agent. RecruitUp specialises in finding and placing qualified South African tradespeople with Australian employers who are ready to sponsor — we handle the recruitment side, not the visa lodgement.

The Shortage

Why Australian roofing contractors can't find tilers

Pitched tile roofs go on in a tight window, after the frame is signed off and before lock-up, so when a crew is short the delay lands on the plasterers, electricians and fit-out trades queued behind it. Only 54.5% of advertised Skill Level 3 trade vacancies were filled nationally in the last measured period (Jobs and Skills Australia, Occupation Shortage Report, December quarter 2025), and roofing work is also physically punishing, which makes it hard to retain locally trained apprentices past their first summer.

Why South Africa

Why South African roof tilers specifically

Concrete tile roofs are the everyday product, not a specialty

Concrete and clay tile roofing is the dominant residential roof in South Africa, so candidates have laid thousands of square metres of interlocking tile, set battens at the correct gauge and fixed to trusses rather than only repairing existing roofs.

Bedding, pointing and ridge capping done properly

Mortar-bedded ridges, hips and verges, plus the flexible pointing that follows, are routine finishing work. Candidates can describe how a ridge is set out from the gable so the lines run true, which is the detail a builder or a homeowner sees from the street.

Working at pitch and height as a daily baseline

Candidates have spent their careers on steep pitches, handling loaded tiles, battens and bundles with roof ladders and harnessing, so the Australian working-at-heights requirements are an extension of habits they already hold.

Heat and exposure tolerance

South African crews lay roofs through long hot summers and sudden afternoon storms, which suits Queensland, Western Australia and northern New South Wales roofing programmes where summer is the busiest period.

Qualifications

South African Roofing Qualifications & Skills Assessment

\n

South African roof tilers typically qualify through an apprenticeship and the national trade test process, with a Section 26D certificate as the formal credential, supported by reference letters from contractors who can describe the roofs the candidate has actually completed.

A skills assessment through the relevant Australian assessing authority comes before nomination, and the outcome turns on how clearly the training and the work history behind it are documented. RecruitUp pulls those records together early.

Australian roof tiling is governed by its own installation standards, including AS 2050 for the installation of roof tiles, and wind classification and bushfire attack level requirements affect how tiles are clipped and sealed. Roofing contractor licensing varies by state, so confirm the rules for your location.

Every site worker needs a General Construction Induction card (White Card), and a working-at-heights unit is the norm for roofing crews. Both are short local courses that RecruitUp flags before arrival.

SA Roofing Qualification Route

Apprenticeship ➜ Trade Test ➜ Section 26D Certificate ➜ Skills Assessment ➜ 482 Nomination Lodged

482 Visa Eligibility — Roof Tilers

ANZSCO Reference333311 — Roof Tiler
Visa TypeCore Skills stream (482 visa)
Occupation ListingCore Skills Occupation List (CSOL)
Skills AssessorTrades Recognition Australia (TRA)
Additional RequirementWhite Card, working-at-heights unit, and any state roofing licence
Salary RequirementSet at the higher of CSIT ($79,423 p.a.) or market rate
Visa TermGrants run up to four years
PR OptionCan convert to 186 ENS permanent residency (2–3 years)

Home Affairs reviews each application individually — confirm current occupation-list status and any state licensing with your migration agent before committing to a start date.

Timeline

Planning the Timeline for a Sponsored Roof Tiler

Plan on 4 to 8 months from brief to a roof tiler on site. Roofing contractors work to the weather and to the frame schedule, so we recommend lodging before your next high-volume estate release rather than after it.

RecruitUp sources candidates
RecruitUp
75th %ile
2–4 weeks
90th %ile
4–8 weeks
Sponsorship approval obtained
Employer + agent
75th %ile
1–3 months
90th %ile
4–5 months
Role nomination filed
Employer + agent
75th %ile
1–3 months
90th %ile
2–4 months
Visa grant received
Agent + Home Affairs
75th %ile
1–3 months
90th %ile
3–5 months
Skills evidence prepared (runs alongside)
Candidate & agent
75th %ile
3–5 months
90th %ile
5–7 months

Home Affairs publishes live processing figures, so ask your agent for the current median before committing to a roofing start date.

Our Process

How RecruitUp Sources & Places South African Roof Tilers

Technical screening for roof tilers is our job; the visa paperwork belongs to your migration agent.

01

Outline the Roofing Scope

New-build volume homes, re-roofs, or commercial pitched roofing, plus the tile profile and location, so the role is clear before any candidate is contacted.

02

Test Roofing Know-How

Trade certificates, references and a technical call covering batten gauge, headlaps, bedding mortar, pointing and fall protection are checked before a shortlist is shared.

03

Compare Roofer Profiles

Each profile lists the tile systems laid, residential versus commercial background, and how many squares a day the candidate typically works, so you can choose who to interview.

04

File the Sponsorship Track

Paperwork moves through your agent while our team keeps police clearances, trade certificates and medicals current.

05

Settle, Induct and Follow Up

A White Card, working-at-heights unit and a check-in at four weeks help the new tiler adapt to your products and crew.

Cost Overview

What Does It Cost to Sponsor a Roof Tiler?

Government Fees

  • Sponsorship application fee: ~$420
  • Nomination application: ~$330
  • SAF levy (SME): $1,200/yr upfront
  • Visa application charge: ~$4,015

Agent & Compliance Fees

  • Migration agent: typically $3k–$8k
  • RecruitUp placement fee
  • TRA trade assessment: ~$600–$800
  • State roofing licence or registration (where required)

Settling-In Costs

  • Travel & resettlement support (optional)
  • Short-term rental near your first job (optional)
  • White Card and working-at-heights course on arrival
  • Harness, roof ladder, tile cutter and PPE
Common Questions

Hire Roof Tilers — FAQ

Which occupation code do sponsored roof tilers get nominated under?+
ANZSCO 333311 (Roof Tiler) is the occupation most roofing sponsorships use, and the Subclass 482 Core Skills stream is the standard pathway once your business holds Approved Standard Business Sponsor status. RecruitUp handles sourcing and screening; your migration agent runs sponsorship and nomination. Metal roof sheeting and roof plumbing can sit under different occupations, so confirm the nomination with your agent.
Are South African roofing qualifications recognised for the 482 visa?+
Candidates normally hold a trade-tested certificate backed by contractor references, and the skills assessment looks at both the training and the documented work history. The strongest files include photographs, completed-roof descriptions and referee contact details for each employer.
Can candidates set out battens, headlaps and ridge lines unsupervised?+
Screening covers batten gauge calculation from the tile profile and rafter length, headlap and sidelap checks, tile fixing patterns and the setting-out of hips, ridges and verges so the lines run true from the street. A competent candidate explains these decisions without prompting.
Do candidates know bedding mortar and flexible pointing, or only dry-fix systems?+
Many South African crews have bedded and pointed ridges for years and understand the mix ratios, curing and colour matching involved. Others have worked mainly on dry-fix systems. Each profile records which methods the candidate has done at volume so you can match the person to your product range.
What working-at-heights training will a sponsored roof tiler need?+
Australian roofing crews work under state work health and safety rules for falls from height, which usually means a working-at-heights unit, edge protection and harness or roof-ladder practice on top of the White Card. These are short local courses and are scheduled for the first fortnight on arrival.
What's a realistic hiring timeline from brief to a roof tiler starting on site?+
Plan on 4 to 8 months from the start of the search to the tiler's arrival, with sponsorship approval, nomination and the visa decision each running roughly 1–3 months and largely in parallel.
Can candidates handle both new-build volume roofs and fiddly re-roofs?+
Candidates describe their experience across estate volume work and older re-roofs, including stripping and replacing broken tiles, checking battens for rot, renewing sarking and rebedding ridges. We note which environment each candidate prefers so a re-roofing business is not sent a candidate used to simple gable roofs.
How do candidates cope with Australian summer heat on a roof?+
Most have worked in comparable temperatures in Gauteng, the Northern Cape or KwaZulu-Natal, and know the basics of early starts, hydration, sunscreen and break rotation. Employers still need a heat policy, and RecruitUp flags this in onboarding so expectations are clear from day one.
Do roofers need a state licence to work in Australia?+
Requirements differ by state. Some regulate roofing or roof tiling work through contractor licensing or registration, and an employee tiler usually works under the contractor's licence. We encourage employers to confirm what applies to their state before lodging the nomination.
What if the roof tiler resigns within the first year?+
Sponsorship obligations still apply, including notifying Home Affairs of a cessation within the required timeframe. RecruitUp's guarantee period covers a replacement search, and we screen for roofing contractors' typical retention drivers, such as regular hours, travel allowances and stable crew leaders.
Do candidates know sarking, anti-ponding boards and valley flashing details?+
Screening covers foil sarking laid under battens, anti-ponding boards at eaves, valley iron fixing, apron flashing at walls, lead and Colorbond flashings around chimneys and skylights, and how water is directed into gutters. Candidates who can sketch these junctions from memory tend to be the most reliable on complex roofs.
Can candidates cut and fit tiles around hips, valleys and dormers accurately?+
Cutting with a wet saw or angle grinder, mitring hip tiles, forming valley cuts and fitting tiles around dormers and penetrations are daily skills. We ask for photographs or references showing cut tiles that sit flush, because crooked cuts are the clearest sign of rushed or untrained work.
What do candidates know about Colorbond, Zincalume and metal roof sheeting?+
South African crews know corrugated IBR and Chromadek sheeting, which share principles with Australian trapezoidal and corrugated profiles, but metal roofing is often a separate occupation and licence in Australia. We record sheeting experience and discuss with your agent whether it fits the nomination.
How do candidates handle solar panel installs and roof penetrations?+
Installing solar mounting rails means lifting tiles, fixing brackets to rafters, flashing penetrations and refitting tiles without breakage. Roofers with this background are in strong demand because installers depend on competent tilers, and we note who has done it so you can offer extra work in slow periods.

MARA Disclosure — Immigration and visa advice is provided by our licensed MARA-registered partner agencies. View our partner agents.